Latest Products http://www.samarth-engineering.in Latest Products Mon, 25 Oct 2021 23:37:17 +0530 en-us http://www.samarth-engineering.in Universal Testing Machine http://www.samarth-engineering.in/universal-testing-machine.htm http://www.samarth-engineering.in/universal-testing-machine.htm Sat, 23 Jan 2021 00:00:00 +0530 We are instrumental in bringing to clients superior quality Material Testing Machines that are known for their optimum quality and excellent performance. This range of Material Testing Machines is designed and developed in compliance with the industry standards. Moreover, Material Testing Machines offered by us is used to acquire accurate results and measurements. Customers can be eased with the affordable rates of the Material Testing Machines. We are highly acclaimed as prominent Material Testing Machines Manufacturer and Supplier. Universal Material Testing Machine http://www.samarth-engineering.in/universal-material-testing-machine.htm http://www.samarth-engineering.in/universal-material-testing-machine.htm Universal Testing Machine Fri, 15 Jan 2021 00:00:00 +0530 We are engaged in providing clients with superior quality Universal Material Testing Machine. The Universal Material Testing Machine is designed for testing metals and other materials under tension, compression bending, transverse and shear loads. The Universal Material Testing Machine can also conduct hardness test on various metals.   Tensile Material Testing Machine http://www.samarth-engineering.in/tensile-material-testing-machine.htm http://www.samarth-engineering.in/tensile-material-testing-machine.htm Universal Testing Machine Fri, 15 Jan 2021 00:00:00 +0530 We offer supreme quality Tensile Material Testing Machine characterized with precision screw and column construction and variable speed drive. The Tensile Material Testing Machine is suitable for studying mechanical behavior of various materials like metals, polymers, elastomers etc. The Tensile Material Testing Machine confirms to IS, BS & ASTM standards. Manual Hardness Testing Machine http://www.samarth-engineering.in/manual-hardness-testing-machine.htm http://www.samarth-engineering.in/manual-hardness-testing-machine.htm Fri, 15 Jan 2021 00:00:00 +0530 The Manual Hardness Testing Machine we offer is used for Hardness of casting, forgings, other metals and alloys of all types, hard or soft, whether flat, round or irregular in shape. Hardness Testing Machine is supplied to Engineering colleges, Laboratories, Inspection departments, Factories etc. Recognized for its high strength, dimensional accuracy, corrosion resistance and other features, the Computerised Hardness Testing Machine is in high demand among the clients. We manufacture Computerised Hardness Testing Machine, with premium materials to make it durable. Brinell Hardness Testing Machine http://www.samarth-engineering.in/brinell-hardness-testing-machine.htm http://www.samarth-engineering.in/brinell-hardness-testing-machine.htm Manual Hardness Testing Machine Fri, 15 Jan 2021 00:00:00 +0530 Brinell Hardness Testing Machine we offer are precision engineered to IS:2281- 1968, BS:240 and ASTM:E10. The Brinell Hardness Testing Machines are ideal for production testing. The unmatched performance of the Brinell Hardness Testing Machine in respective application has made the Hardness Testing Machine an ideal choice of various industries. Components & Working Of Brinell Hardness Testing Machine An 'Optical Device' with 14x magnification is provided in front to project diameter of ball impression on glass screen coupled with a micrometer measuring system with 0.01 mm accuracy The indenter swivels and projects diameter of ball impression instantaneously after unloading operation Designed To Measure Hardness of casting, forgings, other metals and alloys of all types, hard or soft, whether flat, round or irregular in shape Vickers Hardness Testing Machine http://www.samarth-engineering.in/vickers-hardness-testing-machine.htm http://www.samarth-engineering.in/vickers-hardness-testing-machine.htm Manual Hardness Testing Machine Fri, 15 Jan 2021 00:00:00 +0530 The Vickers Hardness Testing Machine we supply is fabricated in strict conformity to 15:1754-196. The Vickers Hardness Testing Machine is made using superlative quality materials to ensure safety and durability of the products. This range of Vickers Hardness Testing Machine also undergoes stringent quality control tests to make them free from all drawbacks. We manufacture and supply Vickers Hardness Testing Machine at market leading prices. Components & Working Of Vickers Hardness Testing Machine Tiny indentation permits testing of a precision finished parts Thin sheet metal are flawlessly tested as applied load is very small Attached with motorized loading and unloading cycle Built-in projection screen to get accurate results Regardless of the load applied same hardness number is obtained on the same specimen For accommodating the high precision loading system & an optical projection screen, the machine frame is designed The specimen is placed on a testing table The test cycle is completely automatic The precise load is applied on a diamond penetrator by lever & weights The load on the machine is removed mechanically after a specific lapse of time. The target is indexed with the test piece Diamond indentation is projected on the measuring screen The diagonals of the indentation can be calculated with the micrometer screw of the projection screen Suitable For Measuring the hardness of precision metallic parts with extensive testing range from soft to hard Construction To accommodate the high precision loading system & an optical projection screen, the machine frame is designed sturdy. Specimen is placed on a testing table. The test cycle is fully automatic. The accurate load is applied on a diamond penetrator by means of a lever & weights. The load is removed automatically after a specific lapse of time. The objective is indexed with the test piece & the diamond indentation is projected on the measuring screen. The diagonals of the indentation can be measured by means of the micrometer screw of the projection screen. Rockwell Hardness Testing Machine http://www.samarth-engineering.in/rockwell-hardness-testing-machine.htm http://www.samarth-engineering.in/rockwell-hardness-testing-machine.htm Manual Hardness Testing Machine Fri, 15 Jan 2021 00:00:00 +0530 Rockwell Hardness Testing Machine we offer is manufactured in conformity to IS: 3804-1988, BS: 891 parts 1&2, ASTM:E18 for Rockwell Test, IS: 2281-1983, BS: 240, ASTM:E10 for rockwell Test & IS: 5073-1988, ASTM:E 18 for Rockwell Superficial Test. The Hardness Testing Machines we offer are simple in design & easy to operate & dimensionally accurate.             Detail Model Unit Seras Serasm SE RAB-1 SE RAB-250 SETWIN Loads Kgf. 60,100 60,100 60,100, 150 60, 100,150 15, 30,45, (Rockwell) 150. 150. 187.5, 250. 187.5, 250. Superficial) 60,100,150 (Rockwell) Initial Load Kgf. 10 10 10 10 3(Rockwell Superficial) & 10 (Rockwell) Max. Test Height mm. 230 230 230 295 295 Depth of Throat mm. 133 133 133 150 150 Max. Depth of elevating mm. 240 240 240 310 310 Screw below base Size of Base (Approx) mm. 171x423 171x423 171x423 210x470 210x470 Machine Height mm. 635 635 635 845 845 Net. Weight (Approx) Kg. 75Kg. 75Kg. 75Kg. 137 Kg 126 Kg. Fatigue Testing Machine http://www.samarth-engineering.in/fatigue-testing-machine.htm http://www.samarth-engineering.in/fatigue-testing-machine.htm Fri, 15 Jan 2021 00:00:00 +0530 Fatigue Testing Machine we offer is extensively used in research institute, laboratories, and also supplied to material manufacturers and diverse industries. We make available the Fatigue Testing Machine which is Table model that does not require a foundation. The Fatigue Testing Machine we offer is light weight, simple in design and high performing. Components & Working Of Impact Testing Machine The rotating beam type machine in which load is applied in reversed bending fashion The standard 8 mm diameter specimen is held in special holders at its ends and located such that it experiences a uniform bending moment The specimen is rotated at 4200 rpm by a motor A complete cycle of reversed stresses in all fibers of the specimen is generated during each revolution The bending moment is applied with the lever system and can be easily changed by moving a weight over the lever Total number of revolution at which the specimen fails is recorded by a mechanical counter An interlocking system puts off the motor at specimen failure Machine meets requirement of IS 5075-1969 Standards 6 digit electronic counters instead of mechanical counter is offered Machine with maximum bending moment upto 400 Kg. cm is also available Fixed with simple lever system for changing load Calibration in Nm also offered Used To Test the fatigue strength of materials Draw S-N diagram Impact Testing Machine http://www.samarth-engineering.in/impact-testing-machine.htm http://www.samarth-engineering.in/impact-testing-machine.htm Fri, 15 Jan 2021 00:00:00 +0530 We make available Impact Testing Machine Model SE-IT 30, which is specifically designed for conducting Izod & Charpy Test. The test methods in the machine conform to BS: 131: PART 4-1972 (Amended 15 Aug. 1993) & BSEN: 10045 - 2: 1993. Impact Testing Machine is suitable for testing raw material specimen as well as finished components. Avail from us the Impact Testing Machine at market leading prices. Components & Working Of Impact Testing Machine Pendulum of the machine is mounted on antifriction bearings Contains two starting positions, the upper one for Charpy and the lower one for Izod testing The Pendulum on release swings down to break the specimen and the power absorbed in doing so is calculated as the variation between the height of drop before rupture & height of raise after rupture of the test specimen The output is read from the maximum pointer on the dial scale Offered With Self centering tong V - notch milling cutter U - notch milling cutter Caliper gauge for checking V notch for Izod & Charpy as per BS: 131 :PART 1, 2, 3 Depth notch gauge including V & U notch, angle & radius Controls of Pendulum The Pendulum supported in the starting positions is by a self resetting latch. The release mechanism is operated by lever. The Pendulum release latch is operated only when this lever is operated. Torsion Testing Machine http://www.samarth-engineering.in/torsion-testing-machine.htm http://www.samarth-engineering.in/torsion-testing-machine.htm Fri, 15 Jan 2021 00:00:00 +0530 Torsion Testing Machine we offer is used on diverse metal wires, tubes and steel materials. We are recognized as one of the dependable Torsion Testing Machine Manufacturers and Suppliers in India. The Torsion Testing Machine offered by us is made up of excellent quality materials that ensure notable features like high durability, effective performance and low maintenance. We supply Torsion Testing Machines at market leading rates. Detail Fixed with auto torque selector to regulate torque ranges Contains geared motor to apply torque to specimen through gearbox Attached with autographic recorder for relation between torque and angle of twist Accuracy + 1 % of the true torque Suitable For Torsion and Twist test on diverse metal rods and flats Torque Measurement by pendulum dynamometer system Computerised Hardness Testing Machine http://www.samarth-engineering.in/computerised-hardness-testing-machine.htm http://www.samarth-engineering.in/computerised-hardness-testing-machine.htm Fri, 15 Jan 2021 00:00:00 +0530 Computerised Hardness Testing Machine is a basic machine, with an 'Optical Device'. It provides better and repeated accuracy, avoiding errors. The range of its Measurement is from 1 mm to 6 mm of diameter with Resolution of 0.01 mm. The system comprises of calibration. The machine consists of CCD Camera, Optics and Illumination systems along with connecting cable. It is available in various models. It is handy and easy to carry. It can be connected to a Laptop or a Desktop. Computerised Rockwell Hardness Testing-Machine http://www.samarth-engineering.in/computerised-rockwell-hardness-testing-machine.htm http://www.samarth-engineering.in/computerised-rockwell-hardness-testing-machine.htm Computerised Hardness Testing Machine Fri, 15 Jan 2021 00:00:00 +0530 Computerised Rockwell Hardness Testing-Machine is motorized for automatic operation cycle. It is effective in testing metal and alloy of all sorts. Computerised Rockwell Hardness Testing-Machine comprises of a Test Force selection in its software or Digital Panel. It consists of LED bar indicator, to set position for easy operation. It provides with large size scale display for easy reading. It is sensitive and accurate but easy to operate. Features : Automatic operating cycle Test Force selection software Large and easy display Application : Computerised Rockwell Hardness Testing-Machine is used for testing the hardness of the metal and alloy of all kinds hard or soft and of all shapes, whether round, flat or irregular in shape. Computerised Vickers Hardness Testing Machine http://www.samarth-engineering.in/computerised-vickers-hardness-testing-machine.htm http://www.samarth-engineering.in/computerised-vickers-hardness-testing-machine.htm Computerised Hardness Testing Machine Fri, 15 Jan 2021 00:00:00 +0530 Computerised Vickers Hardness Testing Machine is fully computerized with image processing technology. The Computerised Vickers Hardness Testing Machine consists of motorized loading and unloading cycle. It also comprises of Wide Testing Range and can be connected to a PC. It is handy and can be carried anywhere. Features : High accuracy Fully computerized Motorised loading and unloading Faster measurement and higher productivity Application : It is highly suitable for measuring the hardness of metals with wide testing range from soft to hard. It can be connected to a Laptop or a Desktop. Computerised Brinell Hardness Testing Machine http://www.samarth-engineering.in/computerised-brinell-hardness-testing-machine.htm http://www.samarth-engineering.in/computerised-brinell-hardness-testing-machine.htm Computerised Hardness Testing Machine Fri, 15 Jan 2021 00:00:00 +0530 We are a leading Computerised Brinell Hardness Testing Machine Manufacturer and Supplier based in India. The Computerised Brinell Hardness Testing Machine provided by us is made from high grade material using technologically advanced equipment and machinery. Our Computerised Brinell Hardness Testing Machine is available with 14x magnification in front for projecting dia of ball impression on glass screen with 0.01mm accurate micrometer measuring system. Avoiding additional time for ball measurement, the indentor rotates and projects dia of ball impression after unloading operation. This process ensures real rockwell number on Computerised Brinell Hardness Testing Machine. Also, our system includes calibration and check facilities for calibrating systems and to check calibration. This process eliminates chances of occurring system error in measurement.